Operating The Radio; Radio On; Band Selection; Tuning - Mazda 3 2018 Owner's Manual

Interior Features
Audio System

▼ Operating the Radio

Tuning button
Band selector button

Radio ON

Press a band selector button (
turn the radio on.

Band selection

Successively pressing the band selector
button ( ) switches the bands as
follows: FM1→FM2→AM.
The selected mode will be indicated.
NOTE
If the FM broadcast signal becomes weak,
reception automatically changes from
STEREO to MONO for reduced noise.

Tuning

The radio has the following tuning
methods: Manual, Seek, Scan, Preset
channel, and Auto memory tuning. The
easiest way to tune stations is to set them
on preset channels.
Manual tuning
Select the station by pressing the tuning
button ( , ) lightly.
5-30
Mazda3_8GE4-EA-17F_Edition1
Audio display
Scan button
Auto memory button
) to
Channel preset buttons
Seek tuning
Automatic search for radio stations starts
when the tuning button ( ,
until a beep sound is heard. The search
stops when a station is found.
NOTE
If you continue to press and hold the
button, the frequency will continue
changing without stopping.
Scan tuning
Press and hold the scan button (
automatically sample strong stations.
Scanning stops at each station for about 5
seconds. To hold a station, press and hold
the scan button (
interval.
Preset channel tuning
The 6 preset channels can be used to store
6 AM and 12 FM stations.
1. To set a channel first select AM, FM1,
or FM2. Tune to the desired station.
2. Press a channel preset button for about
2 seconds until a beep is heard. The
preset channel number or station
frequency will be displayed. The
station is now held in the memory.
) is pressed
) to
) again during this
2017-4-7 11:59:21