Rear View Parking Camera Location; Switching To The Rear View Monitor Display - Mazda 3 2018 Owner's Manual

NOTE
If water, snow, or mud is stuck on the camera lens, wipe it off using a soft cloth. If it

cannot be wiped off, use a mild detergent.
If the camera temperature changes rapidly (Hot to cold, cold to hot), the rear view

monitor may not operate correctly.
When replacing the tires, consult an Authorized Mazda Dealer. Replacing the tires could

result in deviation of the guide lines which appear on the display.
If the vehicle's front, side, or rear has been involved in a collision, the alignment of the

rear view parking camera (location, installation angle) may have deviated. Always
consult an Authorized Mazda Dealer to have the vehicle inspected.
If "No Video Signal Available" is indicated in the display, there could be a problem with

the camera. Have your vehicle inspected at an Authorized Mazda Dealer.

▼ Rear View Parking Camera Location

Sedan

▼ Switching to the Rear View Monitor Display

Shift the shift lever/selector lever to R with the ignition switched ON to switch the display
to the rear view monitor display.
NOTE
When the shift lever/selector lever is shifted from R to another shift lever/selector lever
position, the screen returns to the previous display.
Mazda3_8GE4-EA-17F_Edition1
Rear View Parking Camera
Rear View Monitor
Hatchback
When Driving
4-151
2017-4-7 11:59:21