Mazda Radar Cruise Control (Mrcc) Display Indication; Close Proximity Warning; Setting The System - Mazda 3 2018 Owner's Manual

When Driving
i-ACTIVSENSE

▼ Mazda Radar Cruise Control (MRCC) Display Indication

The MRCC setting status and operation conditions are indicated on the active driving
display.

▼ Close Proximity Warning

If your vehicle rapidly closes in on the vehicle ahead because the vehicle ahead applies the
brakes suddenly while you are traveling in headway control, the warning sound activates
and the brake warning is indicated in the display. Always verify the safety of the
surrounding area and depress the brake pedal while keeping a safer distance from the
vehicle ahead. Additionally, keep a safer distance from the vehicles behind you.
NOTE
In the following cases, the warnings and brakes may not operate even if your vehicle starts
closing in on the vehicle ahead.
You are driving your vehicle at the same speed as the vehicle ahead.

Directly after the MRCC system has been set.

Directly after the accelerator pedal is released.

Another vehicle cuts into the driving lane.


▼ Setting the System

The MRCC system operates when all of the following conditions are met.
Vehicle speed is 30 km/h (19 mph) to 145 km/h (90 mph)

The MRCC is turned on.

The brake pedal is not depressed.

The parking brake is released (parking brake indicator light is turned off).

There is no problem with the DSC.

All the doors are closed.

The driver's seat belt is fastened.

4-104
Mazda3_8GE4-EA-17F_Edition1
Vehicle ahead display
MRCC Distance
between vehicle
display
MRCC Set vehicle speed
2017-4-7 11:59:21