Voice Recognition Learning On/Off - Mazda 3 2018 Owner's Manual

8. Say: [Beep] "0123456789" (Say the
voice input command for voice
recognition learning (1 to 8) according
to the voice guidance.)
9. Prompt: "Speaker enrollment is
complete."
NOTE
If an error occurred in the voice
recognition learning, re-learning can be
done by pressing the talk button with a
short press.
Voice input command list for voice
recognition learning
When reading out, the following points
must be observed:
Read out the numbers one at a time

correctly and naturally.
(For example, "1234" must be read out
"one, two, three, four" not "twelve,
thirty four".)
Do not read out parentheses. "(" and

hyphens "-" are used for separating
numbers in a phone number.
Ex.
"(888) 555-1212" must be spoken "Eight,
eight, eight, five, five, five, one, two, one,
two."
Phrase
1 0123456789
2 (888) 555-1212
3 Call
4 Dial
5 Setup
6 Cancel
7 Continue
8 Help
Mazda3_8GE4-EA-17F_Edition1
Command
NOTE
The applicable phrase appears in the

audio display.
After user voice registration is

completed, voice guidance "Speaker
enrollment is complete" is announced.

Voice recognition learning on/off

1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] "Voice training"
3. Prompt: "Enrollment is enabled/
disabled. Would you like to disable/
enable or retrain?"
4. Say: [Beep] "Disable" or "Enable"
5. When "Disable" is spoken, the voice
recognition learning is turned off.
When "Enable" is spoken, the voice
recognition learning is turned on.
6. Prompt: "Speaker Enrollment is
disabled/enabled."
®
▼ Bluetooth
Preparation (Type B)
Device pairing
®
To use Bluetooth audio and Hands-Free,
the device equipped with Bluetooth
to be paired to the unit using the following
procedure. A maximum of seven devices
®
including Bluetooth audio devices and
hands-free mobile phones can be paired.
Interior Features
Bluetooth®
®
has
5-87
2017-4-7 11:59:21