Mazda 3 2018 Owner's Manual page 363

8. Prompt: "Start the pairing process on
®
your Bluetooth
code is 0000 (XXXX). Input this on
®
your Bluetooth
prompted on the device. See device
manual for instructions."
9. Using the device, perform a search for
®
the Bluetooth device (Peripheral
device).
NOTE
For the operation of the device, refer
to its instruction manual.
10. Select "Mazda" from the device list
searched by the device.
11. Input the 4-digit pairing code to the
device.
12. Prompt: "Please say the name of the
device after the beep."
13. Say: [Beep] "XXXX - - -" (Say a
"device tag", an arbitrary name for the
device.) Example: "Stan's device."
NOTE
Say a paired "device tag" within 10
seconds.
If more than two devices are to be
paired, they cannot be paired with the
same or similar "device tag".
14. Prompt: "XXXXXX - - - (Ex. "Stan's
device") (Device tag). Is this correct?"
15. Say: [Beep] "Yes"
16. Prompt: "Pairing complete"
After a device is registered, the system
automatically identifies the device. By
®
activating Bluetooth
or by activating Bluetooth
first after switching the ignition from OFF
to ACC, the system reads out a voice
guidance, "XXXXXX - - - (Ex. "Stan's
device") (Device tag) is connected".
Mazda3_8GE4-EA-17F_Edition1
device. Your pairing
device when
Hands-Free again,
®
Hands-Free
NOTE
When the pairing is completed, the

symbol is displayed.
®
Some Bluetooth audio devices need a

certain amount of time before the
symbol is displayed.
Device registration can also be done by

operating the audio unit.
Depending on the device, the

registration status may be lost after a
certain period of time. If this occurs,
repeat the entire process from Step 1.
Registered device read-out
®
Bluetooth Hands-Free can read-out the
devices registered to its system.
NOTE
Do this function only when parked. It is
too distracting to attempt while driving
and you may make too many errors to be
effective.
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] "Setup"
3. Prompt: "Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player."
4. Say: [Beep] "Pairing options"
5. Prompt: "Select one of the following:
Pair, Edit, Delete, List, or Set Pairing
Code"
6. Say: [Beep] "List"
Interior Features
Bluetooth®
5-73
2017-4-7 11:59:21