Voice Recognition Learning Function (Speaker Enrollment); When Voice Recognition Learning Is Done For The First Time - Mazda CX-9 Owner's Manual

CX-9_8BH2-EA-10H_Edition3 Page413
Wednesday, March 23 2011 9:32 AM
When the confirmation prompt function is
turned off:
(Ex. Calling John's device. )
NOTE
If the confirmation prompt function is turned
off when making an emergency call, the system
reads out and confirms the command before
executing it.
1. Press the pick-up button (with/without
navigation system) or talk button with
a short press (without navigation
system) or a long press (with
navigation system).
NOTE
For vehicles with the navigation system, you
can also press the talk button with a short
press and say: [Beep] "Telephone" or
"Phone".
2. Say: [Beep] Setup
3. (Type A)
Prompt: Select one of the following:
Pairing options, confirmation prompts,
select phone, language or passcode.
(Type B/Navigation system)
Prompt: Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.
4. Say: [Beep] Confirmation prompts
5. Prompt: Confirmation prompts are
on/off. Would you like to turn
confirmation prompts off/on?
6. Say: [Beep] Yes
7. Prompt: Confirmation prompts are
off/on.
Form No.8BH2-EA-10H
Bluetooth Hands-Free (Voice Recognition)
qVoice Recognition Learning
Function (Speaker Enrollment)
The voice recognition learning function
enables voice recognition appropriate to
the characteristics of the user's voice.
If the recognition of the voice input
commands to the system is not adequate,
this function can largely improve the
system's voice recognition of the user. If
your voice can be recognized sufficiently
without using this function, you may not
realize the added benefit of the function.
To register your voice, the voice input
command list must be read out. Read out
the list when the vehicle is parked.
Perform the registration in as quiet a place
as possible (page 6-135).
The registration must be performed
completely. The required time is a few
minutes. The user needs to be seated in
the driver's seat with the voice input
command list for voice recognition
learning open to the page indicated below.
When voice recognition learning is
done for the first time
1. Press the pick-up button (with/without
navigation system) or talk button with
a short press (without navigation
system) or a long press (with
navigation system).
NOTE
For vehicles with the navigation system, you
can also press the talk button with a short
press and say: [Beep] "Telephone" or
"Phone".
2. Say: [Beep] Voice training
Black plate (413,1)
Interior Comfort
6-159