NetComm N3G007W User Manual page 9

2. Plug in USB modem
---see Picture 2.2
Note: The Wireless WAN Mobile Broadband Router is designed to work with
either UMTS or EV-DO and even HSDPA 3G card that can be used as a modem
(support tethered data). Please refer to your service provider for detailed feature
information.
3. Insert the Ethernet patch cable into LAN Port on the back panel of the Wireless
WAN Mobile Broadband Router, and an available Ethernet port on the network
adapter in the computer you will use to configure the unit.-see Picture 2.3
Note: The Wireless WAN Mobile Broadband Router LAN Port is
"Auto-MDI/MDIX." This provides patch Ethernet cable LAN Port access.
4. Connect the power adapter to the receptor on the back panel of your Wireless WAN
with service to the Wireless WAN Mobile Broadband Router
Picture 2.2
Picture 2.3