Step 3: Configuring Your Wireless Settings - NetComm Dynalink 3GM1WN Setup Manual

Step 3: Configuring your wireless settings:

Please ensure that your modem/router is connected to your computer using a
wireless connection before continuing.
Troubleshooting Tip
After logging into your router, verify the following settings to troubleshoot issues with your wireless connection:
- Wireless MAC filtering is disabled.
- Your SSID is not hidden.
- Confirm your wireless security settings
- Confirm your selected wireless security is supported by your wireless device.
1. If you have not already connected via wireless then from your computer's list of available
wireless networks select the default network name(SSID)of the 3GM1WN which is
'Netcomm_Wireless'.
2. Enter the default security key which is 'a1b2c3d4e5' and press Ok. You should now be
connected via wireless to the 3GM1Wn. For further help please see Step 3 on page 7. To
reconfigure the wireless settings continue with the following steps.
3. Navigate to http://192.168.1.1
4. Using 'admin' (without quotes) as the system password press the 'Login' button.
(Make sure you are using the correct wireless security key)
in a web browser.
.