NetComm N3G007W User Manual page 27

Wireless - Enabled is the
your Wireless Access Point (WAP) settings.
WMM Capable- Disable is the default. WMM® Quality of Service is a set of
features for Wi-Fi networks that improve the user experience for audio, video,
and voice applications by prioritizing data traffic.
SSID- Service Set Identifier (SSID) is the name designated for a specific wireless
local area network (WLAN). The SSID's factory
SSID can be easily changed to establish a new wireless network.( Note: SSID
names may contain up to 32 ASCII characters).
Channel- Channel 11
same channel. (Note: Wireless adapters automatically scan and match the
wireless settings. You may also select the channel you wish to use).
You may select from three levels of encryption to secure your wireless
Security-
network: No Encryption, WEP, 802.1x, WPA-PSK, WPA, WPA2-PSK, or
WPA2.
1. No Encryption None
No Wi-Fi security settings are on the device.
2. WEP:
When you enable the
be used and input 26 or 10 hexadecimal (0, 1, 2...8, 9, A, B...F) digits.
3. 802.1X
Check Box was used to switch the function of the 802.1X. When the 802.1X
function is enabled, the Wireless user must authenticate to this router first to use the
Network service.
1. RADIUS Server IP: IP address or the 802.1X server's domain-name.
2. RADIUS port: The default port is 1812.
default. Selecting this option will allow you to set
is the . Devices on the network must share the
default
:
128
or 64 bit WEP key security, please select one WEP key to
setting is
default default
. The