NetComm N3G007W User Manual page 28

3. RADIUS Shared Key: Key value shared by the RADIUS server and this router.
This key value is consistent with the key value in the RADIUS server.
4. WPA-PSK
1. Select Encryption type, TKIP or AES
2. Passphrase: The length of pre-share key is from 8 to 63.
3. Fill in the key, Ex 12345678
5. WPA
Check Box was used to switch the function of the WPA. When the WPA function is
enabled, the Wireless user must authenticate to this router first to use the Network
service, RADIUS Server.
1. IP address or the 802.1X server's domain-name.
2. Select Encryption and key in RADIUS Server IP/ Port / Shared Key.
3. Key value shared by the RADIUS server and this router. This key value is
consistent with the key value in the RADIUS server.
6. WPA2-PSK
1. Select Encryption type, TKIP or AES.
2. Passphrase: The length of pre-share key is from 8 to 63.
3. Fill in the key, Ex 12345678.
7. WPA2
Check Box was used to switch the function of the WPA2. When the WPA2 function
is enabled, the Wireless user must authenticate to this router first to use the Network
service, RADIUS Server.
1. IP address or the 802.1X server's domain-name.
2. Select Encryption and key in RADIUS Server IP/ Port / Shared Key.
3. Key value shared by the RADIUS server and this router. This key value is
consistent with the key value in the RADIUS server.
WDS Setting...- The web Page is WDS operation, and WDS is defined by the
IEEE802.11 standard has been made available. Using WDS it is possible to wirelessly
connect Access Points, and in doing so extend a wired infrastructure to locations where
cabling is not possible or inefficient to implement.
Wireless Client List... - The page shows a list of wireless client
Click on "Save" to store what you just select or "Undo" to give up
Advanced Setup > Basic Setting > Change Password