NetComm N3G007W User Manual page 30

This product's NAT firewall filters out unrecognized packets to protect your Intranet, so all
hosts behind this product are invisible to the outside world. If you wish, you can make some of
them accessible by enabling the Virtual Server Mapping.
A virtual server is defined as a Service Port, and all requests to this port will be redirected to
the computer specified by the Server IP. Virtual Server can work with Scheduling Rules, and
give user more flexibility on Access control. For Detail, please refer to Scheduling Rule.
For example, if you have an FTP server (port 21) at 192.168.123.1, a Web server (port 80) at
192.168.123.2, and a VPN server at 192.168.123.6, then you need to specify the following
virtual server mapping table:
Service Port
21
80
1723
Click on "Save" to store what you just select or "Undo" to give up
Advanced Setup > Forwarding Rules > Special AP
Server IP Enable
192.168.123.1
192.168.123.2
192.168.123.6
V
V
V