Control Leds - TP-Link TL-WR1043N User Manual

3. Toggle on Traffic
Statistics List section.
Click Refresh to update the statistic information on the page.
Click Reset All to reset all statistic values in the list to zero.
Click Delete All
Click to reset the statistic information of the specific device.
Click to delete the specific device item in the list.

11. 11. Control LEDs

The router's LEDs indicate router's activities and status. You can turn on or turn off the
LEDs either from the web management page or by pressing the LED button.
To turn on or off the LEDs:
¾
• Press the LED button on the router (if available) about 2 seconds to turn on or off the
LEDs.
• Visit http://tplinkwifi.net, and log in with the username and password you set for the
router. Click the LED
¾ To turn off LEDs during Night Mode Period:
1 ) Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2 ) Go to Advanced
3 ) In the LED Control
4 ) Specify a time period in the
off during this period.
5 ) Click Save.
Statistics, and then you can monitor the traffic statistics in
to delete all statistic information in the list.
icon in the top right corner of the page.
> System Tools
section, check the box for
Night Mode Period
> System Parameters.
Enable Night
as needed, and the LEDs will be
Traffic
Mode.
68