Set Up A Dynamic Dns Service Account - TP-Link TL-WR1043N User Manual

2. Click View Exsiting Devices
3. Enter the IP address
4. Enter the Description
5. Check the box for

10. 4. Set Up a Dynamic DNS Service Account

Most ISPs assign a dynamic IP address to the router and you can use this IP address to
access your router remotely. However, the IP address can change any time and you don't
know when it changes. In this case, you might apply the DDNS (Dynamic Domain Name
Server) feature on the router to allow you and your friends to access your router and
local servers (FTP, HTTP, etc.) using domain name without checking and remembering
the IP address.
Note:
DDNS does not work if the ISP assigns a private WAN IP address (such as 192.168.1.x) to the router.
To set up DDNS, please follow the instructions below:
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Advanced >
3. Select the DDNS
account, select a service provider and click
or enter the
to reserve for the client device.
for this entry.
Enable This Entry and click OK.
Network > Dynamic
Service Provider (NO-IP or DynDNS). If you don't have a DDNS
MAC address of the client device.
DNS.
Go to register.
48