Use Quick Setup Wizard; Manually Set Up Your Internet Connection - TP-Link TL-WR1043N User Manual

4. 1.

Use Quick Setup Wizard

The Quick Setup Wizard will guide you through the process to set up your router.
Tips:
If you need the IPv6 Internet connection, please refer to the section of
Follow the steps below to set up your router.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Click Quick Setup
to connect your router to the Internet.
Note:
During the quick setup process:
• If you are not sure of the
Internet connection information.
• If you have changed the preset wireless network name (SSID) and wireless password, all your wireless
devices must use the new SSID and password to connect to the router.
4. 2.

Manually Set up Your Internet Connection

In this part, you can check your current Internet connection settings. You can also
modify the settings according to the service information provided by your ISP.
Follow the steps below to check or modify your Internet connection settings.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Basic > Internet.
3. Select your Internet connection type from the drop-down list.
Note:
If you are unsure of what your connection type is, click
cables and connection information, you can also refer to the demonstrations in Step 4 to determine your connection
type.
4. Follow the instructions on the page to continue the configuration. Parameters on the
figures are just used for demonstration.
1 ) If you choose
Dynamic IP users are usually equipped with a cable TV or fiber cable.
on the top of the page. Then follow the step-by-step instructions
Internet Connection
Dynamic IP, you need to select whether to clone the MAC address.
Set Up an IPv6 Internet
Type, please click Auto Detect
Auto Detect. Since different connection types need different
Connection.
or contact your ISP for
13