TP-Link TL-WR1043N User Manual page 21

3 ) PPPoE: By default, the router uses the IPv4 account to connect to the IPv6
server. Click Advanced
Save and then click Connect.
Note:
If your ISP provides two separate accounts for the IPv4 and IPv6 connections, please uncheck the box for
the same session with IPv4 connection
4 ) 6to4 Tunnel: An IPv4 Internet connection type is a prerequisite for this
connection type
input further information if your ISP requires. Click
to input further information if your ISP requires. Click
and manually enter the username and password for the IPv6 connection.
(Manually Set up Your Internet Connection). Click Advanced
Save and then click Connect.
Use
to
18