TP-Link TL-WR1043N User Manual page 53

How can
I do that?
LAN: 192.168.0.1
1. Change the routers' LAN IP addresses to two different IP
addresses on the same subnet. Disable Router B's DHCP
function.
2. Visit http://tplinkwifi.net, and log in with the username and
password you set for Router A.
3. Go to Network >
4. Click Add and finish the settings according to the following
explanations:
Network Destination:
to assign to a static route. This IP address cannot be on the same
subnet with the WAN IP or LAN IP of Router A. In the example,
the IP address of the company network is the destination IP
address, so here enter 172.30.30.1.
Subnet Mask: Determines the destination network with the
Router A
Router B
Switch
PC
192.168.0.100
Advanced Routing.
The destination IP address that you want
Company's server
WAN: 172.30.30.100
LAN: 192.168.0.2
172.30.30.1
50