Network Node; Repeat Panel; Zonal Mimic Panels - Honeywell GENT Operating Instructions Manual

Control and indicating equipment

Network Node

A Network node provides central indications of events in a
Vigilon network.
Some operations identifi ed by the symbol 'NA' covered in
NA
this manual are not applicable for the Network Node.

Repeat panel

There may be one or more repeat panels installed in the
protected premises to provide secondary indications of the
system condition. The larger repeat panel additionally provide
system controls. The repeat panels are usually located near to
secondary entry and exit points of the protected premises.
Fire Routing O/P
Active
Fault/Dis
Repeat indicator panel
(provides system indications)
Repeat panel
(provides system indications and controls)
6

Zonal Mimic panels

There may also be a number of mimic and zonal mimic panels
installed in the protected premises, to provide visual indications
in a graphical and zonal format.
Normally one is installed next to the main control panel. There
may be additional Zonal mimic panels installed in other areas
of the protected premises to cover sub division of the premises.
A3 Zonal panel
(Provides zonal indication
of events)
A3 Mimic panel
(Provides location indication
of area(s) on a plan where
event(s) have occurred)