How To Set The System Clock - Honeywell GENT Operating Instructions Manual

How to set the system clock

How to set the system clock
An incorrect setting of the system clock will
affect any time related sensor confi guration
and consequently results in incorrect event
time information.
a. Press the MENU ON/OFF key and then the F2 key to select
[Set Up].
b. Press the F4 key to select [User Code]. At the fl ashing
cursor using the keypad input the PIN code and press the
Enter button.
c. Press the F1 key to select [Set Clock]. The system clock is
displayed on the screen. Check the hour digits are fl ashing.
d. Press the F2 or F3 key to [Retard] or [Advance] to the
desired setting.
e. Press the F1 key to select [Next]. Check that the Minute
digits are now fl ashing.
f. Press the F2 or F3 key to [Retard] or [Advance] to the
desired setting.
g. Press the F1 key to select [Next]. Check that the Date
digits are now fl ashing.
h. Press the F2 or F3 key to [Retard] or [Advance] to the
desired setting.
i. Press the F1 key to select [Next]. Check that the Month
digits are now fl ashing.
24
j. Press the F2 or F3 key to [Retard] or [Advance] to the
desired setting.
k. Press the F1 key to select [Next]. Check that the Year is
now fl ashing.
l. Press the F2 or F3 key to [Retard] or [Advance] to the
desired setting.
m. Press the F4 key to select [Enter]. Check that the display
now shows the new time and date.
Any changes made to the time and date will
be automatically sent to the repeat panels
in the system. The system clock adjusts
automatically for Day light saving, if set
up during commissioning. Now 'Save' the
changes made to the clock settings.