Siemens SIMATIC PROFINET Function Manual page 51

Alternative procedure: Changing the device name of a PROFINET device in the network view
Requirement: The "Generate PROFINET device name automatically" check box is selected.
1. In STEP 7, select the "Network overview" tab in the tabular area of the network view.
2. In the "Device" column, overwrite the name in the row of the relevant PROFINET device.
The name is also changed accordingly in the graphic area of the network view.
Figure 3-5 Changing the device name of a PROFINET device in STEP 7
Procedure: Changing the IP address
To change the IP address, follow these steps:
1. In the network or device view of the STEP 7 hardware and network editor, select the
PROFINET interface of a PROFINET device.
2. In the Inspector window, go to "Ethernet addresses" in the "IP protocol" area.
PROFINET with STEP 7 V14
Function Manual, 09/2016, A5E03444486-AG
Parameter assignment/addressing
3.2 Device name and IP address
51