Table of Contents
Advertisement
General layout
MCD3007 ~ MCD3055
MCD3075 ~ MCD3110
MCD3132
8
MCD3000 Series
MCD3185 ~ MCD3800
Use cables complying with local
regulations.
Power wiring - Standard connection
Supply voltage must be connected to the starter input
terminals L1, L2 & L3. The motor terminals must be
connected to the soft starter output terminals T1, T2 &
T3.
Power wiring - Bypass connection
A bypass contactor may be used to bypass the starter
during run. A separate set of power terminals is
provided within the MCD3000 for connection of the
bypass contactor. These bypass terminals enable the
MCD3000 to continue to provide all motor protection
and current monitoring functions when the bypass
contactor is closed.
MG.15.A2.22 – VLT is a registered Danfoss trademark
Hide quick links:
Advertisement
Table of Contents
