GE B90 Instruction Manual page 226

PRODUCT SETUP
PARAMETER
Range: Indicator 1...Indicator 96
Default: Indicator 1...Indicator 96
Read-only field. Up to 96 windows are possible.
CONTENT
Range: Actual, Alarm, Mixed
Default: Alarm
Select if the cell is to be an alarm, an actual value, or a combination thereof, for example consists of a single metered
value (set to "Actual"), contains a single alarm indication (set to "Alarm"), or contains both a metered value and an alarm
indication (set to "Mixed").
ALARM INPUT
Range: OFF, ON, any FlexLogic operand
Default: OFF
Select a trigger for the alarm, or the input signal connected to the alarm. For example, when set to "FIRST ETHERNET
FAIL" and the Ethernet connection on port 1 goes down, the alarm is triggered. The field is read-only for an actual value.
The options displayed for selection are the FlexLogic operands specific to the product.
ALARM TYPE
Range: Acknowledgeable, Self Reset, Latched
Default: Acknowledgeable
Set the alarm type. The field is read-only for an actual value.
Acknowledgeable — Follow the state transitions, as outlined in the Annunciator section of the Interfaces chapter.
5
Self Reset — Track the state of the input operand. The alarm turns on when the trigger activates and off when the trigger
clears.
Latched — Alarm remains latched and can be reset using the RESET button.
To acknowledge/reset/unlatch an alarm, use the arrow buttons on the graphical front panel and press the Enter button.
TEXT (LINE 1 to 3)
Range: up to 10 alphanumeric characters
Default:
The text that displays in the annunciator cell, over three lines. Three lines can be displayed. Note that a specified
metering value replaces the text for the selected line. This means that a line can display text or be set to show an actual
metered value. If the text does not display it is because an actual metered value is over-riding it; change the line for the
text or for the actual value.
TEXT COLOR
Range: 24-bit color selector
Default: White
The color to display any of the three text or actual value lines specified.
BACK COLOR
Range: 24-bit color selector
Default: Red
The background color to display for any triggered cell, for example when alarm is triggered.
Configure
Range: Configure
Default: Configure
The Configure button becomes active when the CONTENT field is set to "Actual" or "Mixed." The window configures
metered values.
5-34 B90 LOW IMPEDANCE BUS DIFFERENTIAL SYSTEM – INSTRUCTION MANUAL
CHAPTER 5: SETTINGS