Empty Key; Configuring An Empty Key Using The Mitel Web Ui - Mitel 6940 User Manual

Softkeys
2. Select from Key 1 through Key 48 on the Top keys.
or
Select from Key 1 through Key 30 on the Bottom keys.
3. In the Type field, select Call History.
4. In the Label field, enter a label to display on the phone for the key (default is "Call History").
5. Click Save Settings.
Expansion Module Keys
6. Select from Key 1 through Key 84 (M695).
7. In the Type field, select Call History.
8. In the Label field, enter a label to display on the phone for the key (default is "Call History").
9. Click Save Settings.

Empty Key

You can set a softkey to force a blank entry on the IP phone display for a specific key. You do this
by setting the softkey to Empty. The keys are added in order (from key 1 to Key 30 [bottom] or Key
48 [top]) after any hard-coded keys have been added. If a particular key is not defined, it is ignored.

Configuring an Empty Key Using the Mitel Web UI

1. Click on Operation > Softkeys and XML.
or
Click on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1 through Key 48 on the Top keys.
or
Select from Key 1 through Key 30 on the Bottom keys.
3. In the Type field, select Empty.
4. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Configuring Softkeys
cxxxv