Starting; Using Gear Shifting Mechanism; Driving On The Slope; Using Brake And Stopping - Benelli Tornado TNT600 Owner's Manual

STARTING

Grasp the clutch handle for a short moment, then step down the speed shifting lever to put
into first gear. Turn the accelerator control handle facing the driver, at the same time, loose the
clutch handle slowly and stably, now the motorcycle will move forward.

USING GEAR SHIFTING MECHANISM

The gear shifting mechanism can ensure the stable running of the engine under normal
operation range. The rider shall choose the optimum gear shifting under general conditions.
The rider should decelerate and make the engine to run within the normal running range.

DRIVING ON THE SLOPE

When climbing steep slope, the motorcycle will begin to decelerate and seem to be
underpowered, the rider should change into the lower gear, then the engine can operate
within its normal power range. Please shift the gear quickly to prevent the motorcycle to lose
speed.
When on downhill, please shift the engine into lower gear for the convenience of braking. Do
not make the rotating speed of the engine too high.

USING BRAKE AND STOPPING

Use the front and rear brake evenly at the same time. Lower the gear to slow down.(Apply the
engine brake).
Press the clutch lever against the control handle (cut-off position) before the motorcycle stops
and shift into neutral position.
30