Benelli Tornado TNT600 Owner's Manual page 18

Clutch handle
When starting the engine or shifting the gear, operate the clutch handle to cut off the driving
of rear wheel.
Horn button
Pressing the horn button, the horn will make sound.
Headlamp high-low beams switch
Press the headlamp high -low beams switch to position, the headlamp high beam will be on
and high beam indicator light in the instrument panel lights up too;
Press the switch to " "position, the headlamp low beam will be on. Use low beam light when
driving in the downtown or in front of vehicles so as not to influence the vision of other people.
Turn signal lamp switch
Press the left turn signal lamp switch , the left turn signal light will flash. At the same time,
the green turn indicator light in the instrument panel will flash too. Turn the turn signal lamp
switch to the middle position to cancel the turn signal.
Lighten up the turn signal lamp when making a turn or changing lanes. Turn off the turn signal lamp in time
after making a turn so as not to affect the normal driving of other vehicles and avoid accidents.
17