Operation Procedures; Power Lock - Benelli Tornado TNT600 Owner's Manual

OPERATION PROCEDURES

POWER LOCK

When the key turns to "
key can not be taken out.
When the key turns to "
can be taken out.
(Park) position: when the vehicle parks at roadside at night, the key turns to "
the key can be taken out now, the rear lamp (parking lamp) will be kept on.
(Lock) position: turn the key counter-clockwise to "
lock core to lock.
Lock the turn direction and take out the key to prevent from being stolen. Turn and confirm the lock. Do not
park in the place holding up the traffic.
"position, the power gets through and the engine starts to run. The
"position, the power cuts off, and the engine can not run. The key
15
" position, the lock will extend out the
" position,