AMX UDM-0102 Operation/Reference Manual page 56

Configuration - Devices Page
4.
Click the Schedule link in the Control Bar to open the Schedule page, with this (new) scheduled event
indicated at the top of the page (FIG. 53).
Scheduled event name (default = "Device", editable field)
FIG. 53 Schedule page - new scheduled event entry (top of page)
a.
Enter a descriptive name in the text field (by default, all new scheduled events are named "Device").
b. Set the frequency details - select one of the following from the Frequency drop-down menu:
c.
Enter the Hour and Minute (in 24-hour format) at which you want this event to occur in the text fields
to the right of the Frequency drop-down menu. For example, enter "9" : "15" to indicate 9:15AM.
d.
Click Add to add this scheduled event to the schedule (FIG. 54).


Scheduled event name (example: "AllOn")
FIG. 54 Schedule page - scheduled event entry
5.
Select the Enable checkbox to enable this scheduled event. Scheduled events must be enabled before they
will occur.
Note that on the Schedule page, there are three additional options for each scheduled event:



42
Command (selected in the Devices page - Control Bar)
Frequency / Time settings for this scheduled event
• Hour: Event happens at a specified time and then every 60 minutes.
• Day: Event happens at a specified time and then every 24 hours.
• Weekday: Event happens at a specified time and then every 24 hours (Mon. through Fri.).
• Sunday: Event happens every Sunday at the specified time.
• Monday: Event happens every Monday at the specified time.
• Tuesday: Event happens every Tuesday at the specified time.
• Wednesday: Event happens every Wednesday at the specified time.
• Thursday: Event happens every Thursday at the specified time.
• Friday: Event happens every Friday at the specified time.
The scheduled event is added to the schedule list (top of the Schedule page).
The entry for this scheduled event in the schedule list provides a summary of info on this scheduled
event (Name, Command, Included Devices, and Frequency & Time settings):
Command to be executed at scheduled time(s)
Devices included in this scheduled event (example: Devices 1 & 2)
Click to add this scheduled event to a Preset Schedule
Click to remove this scheduled event from the schedule
Execute - click to test (execute) the scheduled event.
Preset - click to add this scheduled event to a (new) Preset schedule. Presets are created by
combining two or more pre-defined Scheduled events (see the Creating a Preset Schedule section
on page 46 for details).
Remove - click to delete this scheduled event.
Devices included in this scheduled event
(Include checkboxes selected in the Devices page)
Click to add this scheduled event to the schedule
Click to enable this scheduled event
Click to execute this event
UDM-0102 and UDM-RX02 Operation/Reference Guide
Frequency / Time settings
for this scheduled event