Adjusting The Lubrication For The Hook - DURKOPP ADLER 512-211-01 Service Instructions Manual

12.3 Adjusting the lubrication for the hook

Fig. 37: Adjusting the lubrication for the hook
(1) - Hole
To adjust the lubrication for the hook:
1. Tilt the machine head.
2. Loosen and remove the lock screw (2).
 The lubricating screw is located underneath the screw. The lubrica-
3. Adjusting the lubricating screw:
Important
Turn the lubricating screw maximum ½ turn clockwise or counterclock-
wise.
4. Insert and tighten the lock screw (2).
50
NOTICE
Property damage may occur!
Damage to the oil wick when the screw is too tight.
Turn the lubricating screw maximum ½ turn .
①
ting screw presses against the oil wick of the hook lubricator.
• Increasing the lubrication: turn the lubricating screw coun-
terclockwise
• Reducing the lubrication: turn the lubricating screw clockwise
(2) - Lock screw
Service Instructions 512-211-01/532-211-01 - 01.0 - 10/2017
Maintenance
②