Adjusting The Lubrication For The Hook - DURKOPP ADLER 512-211-01 Service Instructions Manual

Maintenance

13.3 Adjusting the lubrication for the hook

Abb. 41: Adjusting the lubrication for the hook
(1) - Screw
Adjusting steps
1. Loosen and remove the screw (1).
 The lubricating screw is located underneath the screw. The lubrica-
2. Adjusting the lubricating screw:
3. Insert and tighten the screw (1).
Service Instructions 512-211-01/532-211-01 - 00.0 - 06/2016
ting screw presses against the oil wick of the hook lubricator.
• Loosening the screw: Increases lubrication for the hook
• Tightening the screw: Reduces lubrication for the hook
①
69