Table of Contents
Advertisement
Troubleshooting
15 Troubleshooting
15.1 Customer Service
Contact for repairs and issues with the machine:
Dürkopp Adler AG
Potsdamer Str. 190
33719 Bielefeld, Germany
Tel. +49 (0) 180 5 383 756
Fax +49 (0) 521 925 2594
Email: service@duerkopp-adler.com
Internet: www.duerkopp-adler.com
15.2 Messages of the software
Please contact customer service if an error occurs that is not described
here. Do not attempt to correct the error yourself.
Error
Meaning
E
8 Error table data
E
1 0 Error sewing pattern
number
E
3 0 Error needle bar
position top
E
4 0 Error sewing field
E
4 2 Error scaling
E
4 5 Error sewing pattern
data
E
5 0 Pause
E
3
0 2 Error machine head Machine head has moved. • Fold back machine head.
Service Instructions 512-211-01/532-211-01 - 01.0 - 10/2017
Possible cause
Unable to read the table
data
The selected sewing pat-
tern is not saved in ROM or
is set to non-readable. The
sewing pattern is "0"
The needle bar is not at the
top position
Sewing field exceeded
Sewing length is below
10 mm
Sewing pattern data cannot
be applied
Reset button pressed while
sewing.
Sewing machine stopped.
Remedial measures
Process in the order specified!
• Save the table data again.
• Press the Reset button to confirm the
sewing pattern number.
• Check the connections.
• Turn the needle bar to the top dead center
position.
• Press the Reset button.
• Check X/Y scaling.
• Press the Reset button.
• Check sewing pattern and X/Y scaling.
• Press the Reset button.
• Check ROM.
• Press the Reset button.
• Actuate the thread trimmer.
• Restart the sewing process.
55
Advertisement
Table of Contents
