Fig. 33: Checking the oil level of the gear (2)
(5) - Oil gauge glass
When oil splashes at the oil gauge glass during operation enough oil
12.2.2 Lubricating with grease
Allowing the machine to operate at peak efficiency requires that its moving
parts be lubricated sufficiently.
Lubrication points on the rear of the machine
Abb. 34: Lubrication points on the rear of the machine (1)
(1) - Cam disk
(2) - Fleece
1. Apply an adequate amount of grease to the fleece (2) to lubricate the
2. Apply a small amount of grease to the joints (3) to ensure they remain
48
is filled in.
①
②
outer side of the cam disk (1).
flexible.
(3) - Joints
Service Instructions 512-211-01/532-211-01 - 01.0 - 10/2017
Maintenance
⑤
③