Mounting
7.3 Assembly and disassembly with different mounting systems
Mounting the size S0 reversing starter with AC operation and spring-loaded connection system on a
DIN rail adapter
①
②
③
Disassembling the feeder from the DIN rail adapter
To disassemble the feeder, unscrew the screws and pull the feeder down to remove it.
Disassembling the DIN rail adapter from the DIN rail
To disassemble the adapter, press on it then pull it down to remove it.
76
Mount the spacer (d) on the contactor (if this has not been done already).
Snap the feeder onto the DIN rail adapter.
Screw the feeder to the DIN rail adapter:
Use one screw to fasten the left-hand contactor and another to fasten the right-hand
•
contactor.
Push the screw through the lower left-hand fastening hole and the adjacent spacer (d).
•
Do not use any connecting pieces to fasten the connection.
The feeder sits tight on the adapter.
SIRIUS - SIRIUS 3RA load feeders
Manual, 09/2016, A5E03656507520A/RS-AB/003