Siemens SIRIUS Manual page 88

Mounting
7.3 Assembly and disassembly with different mounting systems
Disassembling the DIN rail adapter from the DIN rail
The procedure for disassembling the DIN rail adapter with mounted size S3 direct-on-line
starter is shown in the figure below. You require a screwdriver for disassembling.
①
②
③
88
Press the locking device down with a screwdriver. Then push the DIN rail adapter with
mounted feeder forwards against the pressure of the mounting spring.
Pull the DIN rail adapter with mounted feeder forwards with a swivel action.
Press the DIN rail adapter with mounted feeder upwards and remove the DIN rail adapter with
mounted feeder from the DIN rail.
SIRIUS - SIRIUS 3RA load feeders
Manual, 09/2016, A5E03656507520A/RS-AB/003