Mounting The Direct-On-Line Starter (Size S2) - Siemens SIRIUS Manual

Mounting the direct-on-line starter (size S2)

The figure below shows the work steps for mounting the direct-on-line starter in size S2.
①
③
④
Figure 7-43
SIRIUS - SIRIUS 3RA load feeders
Manual, 09/2016, A5E03656507520A/RS-AB/003
②
/ Hook the feeder into the upper hooking position of the motor starter protector, and swivel
the feeder to the busbar adapter.
Press the lock on the contactor down using a screwdriver, and push the feeder onto the
DIN rail of the busbar adapter.
Insert the connecting cables into the corresponding main conductor terminals. Screw the
main conductor terminals tight.
Mounting on the busbar adapter (direct-on-line starter, screw-type connection system,
size S2)
7.3 Assembly and disassembly with different mounting systems
Mounting
101