Motorola VC70N0 Quick Reference Manual page 7

VC70N_QRG_72-164687-01_English_October 16.fm Page 7 Tuesday, October 16, 2012 2:29 PM
Quick Reference Guide
bracket. If the supplied cap screws are not long enough, use M10 - X
stainless steel Allen head screws where X represents the length in
millimeters of the required screws.
Positioning the Vehicle Computer
• Position the vehicle computer to ensure proper ventilation around the
device.
• Determine the best position for the vehicle computer and all the
associated components. If a similar vehicle computer was previously
installed, check to see if the position it used is suitable for the VC70.
• Test the installation for at least 30 minutes before installing on another
vehicle:
Check that the position of the
-
vehicle computer does not
adversely obstruct vehicle
controls.
Check that the vehicle
-
computer does not adversely
obstruct the driver's view.
Check the position of the
-
vehicle computer for user
comfort over long periods.
Check positioning to avoid
-
extreme wrist angles that may
cause injury.
7