Installing The Vc70 On A Cart, A Wall, Or A Desktop - Motorola VC70N0 Quick Reference Manual

VC70N_QRG_72-164687-01_English_October 16.fm Page 14 Tuesday, October 16, 2012 2:29 PM
14
Electric Forklifts
See the vehicle Owner's Manual for specific wiring
NOTE
information.
Connecting the Power Cable
See the vehicle Owner's Manual for specific wiring
NOTE
information.
Disconnect the vehicle battery.
1.
Connect the red wire to the vehicle's positive power source. Connect
2.
the black wire to the vehicle's negative power source.
Connect the yellow wire to the vehicle's positive power source.
3.
Ensure the wiring connections created are sufficiently insulated from
4.
each other.
Re-connect the vehicle battery.
5.
Connect the power cable connector into the vehicle computer's Power
6.
port.

Installing the VC70 on a Cart, a Wall, or a Desktop

To mount the vehicle computer on a cart, a wall, or a desktop:
If mounting to a thin surface such as drywall or plywood, a
CAUTION
reinforcing plate is required.
Install the mounting bracket to the desktop using four cap screws,
1.
eight washers and four nuts.
The VC70 ships with four No. 8 Allen head screws
NOTE
(M10x50mm) for securing the mounting bracket. If the
supplied cap screws are not long enough, use M10 - X
stainless steel Allen head screws where X represents the
length in millimeters of the required screws.
VC70 Vehicle Computer