Optional Accessories; Installation; Installing A Microsd Card - Motorola VC70N0 Quick Reference Manual

VC70N_QRG_72-164687-01_English_October 16.fm Page 5 Tuesday, October 16, 2012 2:29 PM
Quick Reference Guide
Unpacking
The following items are contained in the box:
• VC70 vehicle computer
• this guide.

Optional Accessories

• Scanners (corded and wireless) and scanner cables
• External speaker
• DC and AC power supplies and cables
• External keyboards - QWERTY, AZERTY or numeric with mounting
kits

Installation

Installing a Micro SD Card
A micro SD (Secure Digital) card provides secondary non-volatile
storage. The card holder is located on the right side of the VC70 under
the Service door.
To install a micro SD card:
Open the two screws securing the Service door.
1.
Push the memory card, with the contacts up, into the card slot until it
2.
locks.
Service Door
Micro SD Card
Replace the Service door and secure using two captive screws.
3.
Ensure to torque the screws to seal the device properly.
CAUTION
Otherwise, sealing can be compromised.
Torque the torx head screws to 4.0 + 10% kgf-cm (3.5 ± 10% lbs-in).
4.
5
Memory Card
Slot