Motorola VC70N0 Quick Reference Manual page 17

VC70N_QRG_72-164687-01_English_October 16.fm Page 17 Tuesday, October 16, 2012 2:29 PM
Quick Reference Guide
Insert the keyboard locking knobs through the washers and brackets
3.
and screw into the keyboard tray. Tighten fully to lock into place.
Torque the mounting arms torx head screws to 40 + 10% kgf-cm (35 +
4.
10% lbs-in).
To adjust keyboard tray position, loosen the right and left locking
5.
knobs two full turns and rotate the keyboard tray to the desired
position. The keyboard tray snaps into possible positions as it is
rotated.
Tighten the keyboard tray locking knobs to secure the tray in position.
6.
Plug the keyboard cable into one of the USB connectors and carefully
7.
screw the locking screws using a flat head screw driver.
USB Connector
17