Quick Start Wizard Via Simatic Pdm; Quick Start - Siemens Sitrans LR250 Operating Instructions Manual

3) Launch SIMATIC Manager and create a new project for LR250. Application Guides
for setting up PROFIBUS PA devices with SIMATIC PDM can be downloaded from
the product page of our website at: www.siemens.com/LR250.
4) Open the menu Device – Master Reset and click on Factory Defaults.
5) After the reset is complete click on Close, then upload parameters to the PC/PG.
6) Configure the device via the Quick Start wizard.

Quick Start Wizard via SIMATIC PDM

The graphic Quick Start Wizard provides an easy 5-step procedure that configures the device
for a simple application.
Please consult the operating instructions or online help for details on using SIMATIC PDM.
1) If you have not already done so, check that you have the most up-to-date Electronic
Device Description (EDD) for your instrument. (See
page 41.)
2) Launch SIMATIC Manager and create a new project for LR250. Application Guides
for setting up PROFIBUS PA devices with SIMATIC PDM can be downloaded from
the product page of our website at: www.siemens.com/LR250.

Quick Start

Notes:
• The Quick Start wizard settings are inter-related and changes apply only after you
click on FINISH AND DOWNLOAD at the end of step 5 to save settings offline and
transfer them to the device.
• Do not use the Quick Start Wizard to modify individual parameters: For quick access
to echo profile parameters see
on page 64 for a complete list. (Perform customization only after the Quick Start has
been completed.)
• Click on BACK to return and revise setting or CANCEL to exit the Quick Start.
• For a vessel with obstructions see
Launch SIMATIC PDM, open the menu Device – Wizard - Quick Start, and follow steps 1 to 5.
Page 42 SITRANS LR250 (PROFIBUS PA) – OPERATING INSTRUCTIONS
Echo Setup
on page 54, or see
Auto False Echo Suppression
Quick
Start
Configuring a new device
Parameter Reference
on page 52.
7ML19985JF04
on