Aifb1 - Siemens Sitrans LR250 Operating Instructions Manual

2.5.11.1. Breakpoint 1-9
Values
2.5.11.2. Breakpoint 10-18
Values
2.5.11.3. Breakpoint 19-27
Values
2.5.11.4. Breakpoint 28-36
Values
2.5.11.5. Breakpoint 37 - 40
Values

2.6. AIFB1

Note: Default settings in the parameter tables are indicated with an asterisk (*)
unless explicitly stated.
2.6.1. Static Revision No.
The revision level of the static data associated with Analog Input Function
Block 1. The Static Revision No. is updated whenever a configuration
parameter is changed.
2.6.2. Mode
Used to request an operating mode from the Analog Input Function Block.
Options
Allows you to put the SITRANS LR250 into Out of Service Mode and then reset
it to Automatic Mode.
Manual Mode is used in conjunction with Simulation. See
55. It should be used only with SIMATIC PDM in order to benefit from all the
features available.
7ML19985JF04 SITRANS LR250 (PROFIBUS PA) – OPERATING INSTRUCTIONS
Range: –100 to 100 bits (equivalent to – 50 to 50 dB)
Default: 0
Range: –100 to 100 bits (equivalent to – 50 to 50 dB)
Default: 0
Range: –100 to 100 bits (equivalent to – 50 to 50 dB)
Default: 0
Range: –100 to 100 bits (equivalent to – 50 to 50 dB)
Default: 0
Range: –100 to 100 bits (equivalent to – 50 to 50 dB)
Default: 0
Automatic Mode (AUTO)
Manual Mode (MAN)
Out of Service (O/S)
Simulation
on page
Page 83