Quick Start Wizard Via Simatic Pdm; Quick Start - Siemens Sitrans LR250 Instruction Manual

Quick Start Wizard via SIMATIC PDM

The graphic Quick Start Wizard provides an easy 5-step guide to help you configure the device
for a simple application.
Please consult the operating instructions or online help for details on using SIMATIC PDM.
(Application Guides for setting up Siemens PROFIBUS PA devices with SIMATIC PDM are
available on our website: www.siemens.com/LR250.)
1) If you have not already done so, check that you have the most up-to-date Electronic
Device Description (EDD) for your instrument. (See
page 35.)
2) Launch SIMATIC Manager and create a new project for LR250. Application Guides
for setting up PROFIBUS PA devices with SIMATIC PDM can be downloaded from
the product page of our website at: www.siemens.com/LR250.
3) Open the menu Device – Device Reset and click on Factory Defaults.
4) After the reset is complete click on Close, then upload parameters to the PC/PG.
5) Calibrate the device via the Quick Start Wizard.

Quick Start

Notes:
• The Quick Start wizard settings are inter-related and changes apply only after you
click on Transfer at the end of step 5.
• Do not use the Quick Start Wizard to modify individual parameters: see instead
Parameter Reference
has been completed.)
• Each time the Quick Start Wizard is initiated, the start-up settings are factory
defaults. The Wizard will not recall previous user-defined settings.
• Click on BACK to return and revise setting or Cancel to exit the Quick Start.
Launch SIMATIC PDM, open the menu Device – Quick Start, and follow steps 1 to 5.
Page 36 SITRANS LR250 (PROFIBUS PA) – INSTRUCTION MANUAL
on page 51. (Perform customization only after the Quick Start
Quick
Start
Configuring a new device
7ML19985JF02
on