Coolmaster - iNels Connection server User Manual

CoolMaster

Is used to define air conditiong by universal control unit Coolmaster and control through the application iHC.
Firs step:
First, set the control unit Coolmaster according to the manufacturer's manual. (usually via DIP switches
inside the unit) Setup converter LAN-serial485 (Recommended converter: Adam 4571) according to
Coolmaster
manual and connectconverter with control unit Coolmaster.
Test comunication:
If the air conditioner control unit is properly connected to Coolmaster the display alternately displays
the temperature and mode.
Second step:
Moving on to set the air conditioner in the web interface,
IP address convertor and press button Save the settings wait for load UID air condition in system.
Now you can select the number of units and save CoolMaster unit.
If unsuccessful use reload button and check the air conditioning load UID communication converter with
CoolMaster according to the
Example stored Coomaster unit :
CoolMaster
manual.
http://localhost:8080/clims and fill name and