Get Started - iNels Connection server User Manual

Get started

Commands are given in purple, e.g.:
Notice are given in orange:
Tips and tricks are given in green:
Important application configuration commands in Linux (are entered in terminal):
ifconfig
mount
umount
man
sudo shutdown now
sudo reboot
Putting Connection Server in run
a) Once you unpack Connection server, let the device stabilize at room temperature.
b) Insert attached SD card in the slot.
c) Connect the cabling (do not connect the supply yet):
Display HDMI device
LAN cable for ethernet port
Keyboard to USB port
d) After connecting power suply (adapter with micro USB connector) Connection Server will start
automatically.
e) When starting the system you can watch opening of individual services on the screen. Some services
do not open, and display FAILD in red; in majority of cases it is not a problem; and has no influence
whats over on the run of Connection Server.
f) When start of services is completed, only one line requiring login name will appear on the screen.
Login:
Password:
No characters display when writing a password in terminal
g) To find IP address after signup use command
h) Further settings are performed via web interface iMM Control Center. And display device or keyboard
need not be connected for the rest of time. Power supply, micro SD card with system and application
and connection to network is sufficient to run Connection Server.
Never insert or remove the micro SD card for running Server Connection
- finding IP address of station/server, similar to ipconfig in Windows
- command for connection of certain device (CD-ROM, network drive, etc.)
- command for disconnection of certain device
- command is used to format and display the man page for example.
- command shut down device Connection server from teminal
- command reboot device Connection server from teminal
imm
imm123
sudo reboot
Connection server support set only one door
intercom.
In list we can add and remove elements manually
ifconfig
man mount