Bookmark Energy - iNels Connection server User Manual

Hide thumbs Also See for Connection server:

Table of Contents

Bookmark Energy

Directly in iHC aplication the amount of energy consumption can be clearly displayed.

Energy is recounted based on the amount of impulses that provide outputs from meters (gas-

meters, electrometers, water-meters). Impulses are further processed in an optional input unit of

system iNELS (IM2-140M, IM2-20/40/80B) in form of a counter. This value is by means of export.pub

transferred to Connection Server where variable is in iMMCC on bookmark Energy assigned to

Watter/Gas/Electrical. The setting of pulse conversion to unit of measure, selection of currency

and setting the currency/unit is performed in iMMCC application in activated Energy module. The

Energy module allows recording of consumed energy for a day, week, month and year. Data are

saved in Connection server – the data do not get lost even in case of power shutdown or power cut.

Consumption can be displayed in a table or graph.

The absorbed energy is shown in quantity but also in financial value.

The list of supported measuring devices, which have a pulse output, can be found here:

Click on the System Configuration button (icon of hammer and screwdriver – F11)

Select bookmark System -> counters

Add counter that you name by energy you want to measure

Create a new action that you name e.g. upload electricity

Add a command in the action which will be user action -> commands for counters -> increment counter

Select counter that corresponds with given action (e.g. for upload electricity you put counter electricity)

Add the action created as described above in system configuration to relevant binary input in action line when

the input closes

Once the file export-pub is created and uploaded to iMM server, in bookmark Energy you can assign in the

counter value line (electricity_VALUE). It must be VALUE in the line.

Connection of energy meter

Energy meter connects by means of a binary output unit. Output from supported energy meter is

distinguished to + a -, that's why polarity has to be maintained by bringing – minus to GND terminal

and + plus to IN terminal.

Table of Contents

Do you have a question about the Connection server and is the answer not in the manual?

Cs-3.265