Omron CS1 Manual page 6

Multiple-application controllers with a wide range of functions
Hide thumbs Also See for CS1:
Table of Contents

Advertisement

Further improvements to communications functions.
Seamless networks increase production site transparency.
4
4
High-speed, High-capacity Data
Links between PLCs via
EtherNet/IP
EtherNet/IP is supported. EtherNet/IP is a
global-standard network that uses
cutting-edge general Ethernet technology
for control and information network
integration. This enables data links between
PLCs, data links between a PLC and
multi-vendor devices, and communications
between PLCs and PTs over a general
Ethernet network.
CompoNet Greatly Advances
Wiring Reductions, Greater
Information Handling, and
Standardization
CompoNet is a multi-vendor network for
bit-level control of approximately 1,000
points in 1.0 ms. It supports message
communications at the sensor and actuator
levels. Maintenance information can be
controlled in each Slave for preventative
maintenance of equipment.
Flexible System Building Based
on the DeviceNet
The CS1 Series supports the worldwide
multivendor bus standard, DeviceNet.
Component connections in a multivendor
environment are greatly enhanced by
connecting to up to 64 nodes for a wide
range of FA applications, and by device
profiles and configurator tools that ensure
high reliability and easy maintenance.
Production systems can be configured even
more flexibly by incorporating products such
as the MULTIPLE I/O TERMINAL.
F-10
Functions for Better Ethernet
Support
Ethernet is becoming increasingly important
standard for information networks. Up to
eight socket interfaces for TCP/IP and
UDP/IP are supported, in addition to FINS
messages, FTP file transfers, and mail
notification, so that production management
can now be organically linked with the
production site.
CS1
CompoNet
EtherNet/IP Unit
Master Unit
CompoNet
The Solution for Communicating across Network Levels
The SYSMAC CS1 enables FINS message
seamless communications system for
communications across a maximum of eight
sending FINS messages across multiple
levels of Ethernet and Controller Link
levels (See note.) (using CX-Programmer
Ver. 4.0 or higher) in comparison with three
networks.
levels in previous OMRON systems
Note: For CPU Unit Ver. 2.0 or later.
Expansion up to eight levels lets you build a
Head office or
remote office
• Web browser
• CX-Programmer
FA Wireless LAN Unit
WE70
Ethernet and EtherNet/IP
CS1
Ethernet Unit and
EtherNet/IP Unit
Hub
EtherNet/IP
NS Series V8
CS1
DeviceNet Unit
EtherNet/IP Unit
CompoNet
Master Unit
DeviceNet
GRT1-TBL
ID4
ID4
ID4
OD4
OD4
OD4
END
0
TS
1
0
TS
1
0
1
TS
0
1
TS
0
TS
1
0
TS
1
2
3
2
3
2
3
2
3
2
3
2
3
A Wide Range of Systems,
from Small-scale to Large
OMRON offers a full lineup of reliable PLCs
including the "flagship" CS1 Series, and ranging
from the small scale CP1H to the large-scale
CV Series. The CS1 Series meets the needs
not only of small-scale to large-scale systems,
but of distributed systems as well. This allows
the construction of the optimum system for the
scale and applications of the production site.
Head office, remote office,
home, business trip destination
• CX-Programmer
CS1
Ethernet Unit and
Controller Link Unit
EtherNet/IP Unit
Controller Link
CS1
CS1
Controller
DeviceNet Unit
Controller Link Unit
Link Unit
CompoNet
DeviceNet
GRT1-TBL
ID4
ID4
ID4
OD4
OD4
OD4
END
0
TS
1
0
TS
1
0
TS
1
0
TS
1
0
TS
1
0
1
TS
2
3
2
3
2
3
2
3
2
3
2
3
F-11

Advertisement

Table of Contents
loading

Table of Contents