Omron CS1 Manual page 26

■ Functions Added by Unit Version
The following functions have been added for the unit versions of CS1G/H CPU Units.
Function
Downloading and Uploading Individual Tasks
Improved Read Protection Using Passwords
Write Protection from FINS Commands Sent to CPU Units via
Networks
Online Network Connections without I/O Tables
Communications through a Maximum of 8 Network Levels
Connecting Online to PLCs via NS-series PTs
Setting First Slot Words
Automatic Transfers at Power ON without a Parameter File (.STD)
Automatic Detection of I/O Allocation Method for Automatic
Transfer at Power ON
Operation Start/End Times
MILH, MILR, MILC
= DT, <>DT, <DT, < = DT, >DT, > = DT
BCMP2
GRY
Support of
new TPO
instructions
DSW, TKY, HKY, MTR, 7SEG
EXPLT, EGATR, ESATR, ECHRD, ECHWR
IORD/IOWR reading/writing to CPU Bus Units
PRV2
Function blocks (CX-Programmer Ver.5.0 or later)
Serial Gateway (converting FINS commands to CompoWay/
F commands at the built-in serial port)
Comment memory (in internal flash memory)
Expanded simple backup data
TXDU(256), RXDU(255) (support no-protocol communications with
Serial Communications Units with unit version 1.2 or later)
Model conversion instructions: XFERC(565), DISTC(566),
COLLC(567), MOVBC(568), BCNTC(621)
Special function block instructions: GETID(286)
Additional TXD(236), RXD(235) (support no-protocol
instruction communications with Serial Communications Units
functions with unit version 1.2 or later)
Conversion instructions from numbers to ASCII
and ASCII to numbers
Use of new
Flowchart conversion instructions (one type of
special
block programming instructions) to convert
instructions
flowchart programs from C-series Flowchart PLCs
to ladder programs for CS/CJ-series PLCs
Online editing of function blocks
Function
Support for I/O variables (including array variables
block (FB)
for I/O variables)
functional
upgrades Support for STRING data type and processing
functions for ST language.
● Unit Versions
Unit versions have been introduced to control differences in
functions featured by CPU Units that are the result of version
upgrades.
The unit version is marked on the nameplates of products subject
to version control, as shown in the diagram.
■ Unit Versions and Programming Devices
Applicable PLCs
CS1H-CPU67H/66H/65H/64H/63H
CS1G/H-series
CS1G-CPU45H/44H/43H/42H
14
Programmable Controllers SYSMAC
Model
Unit version No unit version
---
---
---
---
---
OK
(from lot number 030201)
OK
(for up to 8 group)
---
---
---
---
---
---
OK
(from lot number 030201)
---
---
---
OK
(from lot number 030418)
---
---
---
---
---
---
---
---
---
---
---
---
---
---
Name
No unit version Version 2.1 or later
Unit version 2.0 Version 4.0 or later
Unit version 3.0 Version 5.0 or later
Unit version 4.0 Version 7.0 or later
CS1G/H
CS1@-CPU@@H
Unit version 2.0 Unit version 3.0
OK
OK
OK
OK
OK
OK
OK
(for up to 64 group) (for up to 64 group)
OK
---
OK
OK
OK
OK
OK
OK
OK
OK
OK
---
---
---
---
---
---
---
---
---
---
---
---
---
---
Unit
CX-Programmer
OK: Supported, ---: Not supported
Unit version 4.0
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
OK
OK
OK OK
--- OK
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
--- OK
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
--- OK
--- OK
--- OK
--- OK
--- OK
Unit version