Omron CS1 Manual page 16

Multiple-application controllers with a wide range of functions
Hide thumbs Also See for CS1:
Table of Contents

Advertisement

■ CS1 CPU Rack
A CS1 CPU Rack consists of a CPU Unit, Power Supply Unit, and Configuration Units (Basic I/O Units, Special I/O Units, and CPU Bus
Units).
CS1 CPU Backplane
CS1W-BC@@@ (See note.)
● Required Units
Rack
CS1 CPU Backplane (CS1W-BC@@@)
Power Supply Unit
CPU Rack
CPU Unit
Maximum Number of Configuration Units
● Types of Units
In the SYSMAC CS Series, Units are classified into the following three types. The number of Racks differs depending on the type.
Type
CS1 Basic I/O Units
Basic I/O Units
Special I/O Units
CS1 Special I/O Units
CPU Bus Units
4
Programmable Controllers SYSMAC
Basic I/O Units
Special I/O Units
CPU Bus Units
Note: C200H Units cannot be used on the CPU Rack or Expansion Racks
if a CS-series-only CPU Backplane (CS1W-BC@@3) is used.
Unit name
Appearance (example)
C200H Basic I/O Units
C200H Group-2 High-density
I/O Units
C200H Special I/O Units
CS1 CPU Bus Units
CS1 CPU Unit
CS1G/H-CPU@@H
RUN
ERR/ALM
PRPHL
SYSMAC
CS1D-CPU67S
PROGRAMMABLE CONTROLLER
MCPWR
OPEN
PERIPHERAL
PORT
Required number of units
1
1
1
Varies by backplane model
Description
Units with contact inputs and contact
outputs.
Special I/O Units provide more
advanced functions than do Basic I/O
Units, including I/O other than contact
inputs and contact outputs.
Examples of Special I/O Units are
Analog I/O Units and High-speed
Counter Units. They differ from CPU
Bus Units (including Network
Communications Units) in having a
smaller area for exchanging data with
the CPU Unit.
CPU Bus Units exchange data with
the CPU Unit via the CPU Bus.
Examples of CPU Bus Units are
Network Communications Units and
Serial Communications Units.
They differ from Special I/O Units in
having a larger area for exchanging
data with the CPU Unit.
CS1G/H
Power Supply Unit
C200HW-P@@@@(@)
INH
BKUP
COMM
BUSY
CPU Rack
Unit recognition method
In the CS1 System, CS1
Basic I/O Units, C200H
The Units mounted must
Basic I/O Units, and
not exceed the maximum
Group-2 High-density I/O
I/O capacity of the CPU
Units are identified by
Unit.
their mounting positions
(Rack and slot).
Recognized by the CPU
CS-series Special I/O
Unit according to the unit
Units: 96 Units max.;
number (CS-series
C200H Special I/O Units:
Special I/O Units: 0 to 95,
10 or 16 Units max. (From
C200J Special I/O Units:
1 to 4 unit numbers are
0 to 9, or 0 to 15) set with
assigned per Unit,
the rotary switches on the
depending on the model
front panel.
of the Unit.)
Recognized by the CPU
Unit according to the unit
A maximum of 16 Units
number (0 to F) set with
can be mounted.
the rotary switch on the
front panel.
No. of Units

Advertisement

Table of Contents
loading

Table of Contents