Component Identification And Descriptions; Figure 1 Rmu5 Front/Side View - Cortalk RMU5 Generic Installation And Configuration Manual

3 Component Identification and Descriptions

Figure 1 shows the front and right side of the RMU5 enclosure. The important features shown here are the latch and
lock attachment points. To open the RMU5 enclosure, lift the plastic latch arms away from the enclosure body, then
swing the metal straps away from the door. The door should then swing open freely. To close the enclosure, reverse
the procedure.
When the enclosure is mounted external to a rectifier cabinet, it may be desirable or even necessary for satisfying
regulatory requirements, to install a standard padlock on the latches to keep unauthorized users out of the enclosure. To
apply the padlock, knock out the two round plastic pieces on the plastic latch arms, then pass the padlock shackle through
the opening with the latch in a closed position.

Figure 1 RMU5 Front/Side View

MOBILTEX® DATA LTD.
Calgary, Alberta
TITLE:
RMU5 Generic Installation and Configuration Guide
DOCUMENT NO.: SHEET:
RMU5-MAN-001
REV:
8 of 69 1.10