Figure 9 Mechanical And Mercury Displacement Relay Installation; Figure 10 Ac Solid State Triac Relay Installation - Cortalk RMU5 Generic Installation And Configuration Manual

Mechanical and Mercury Displacement Relay Installation
L1
Normally Closed
Mechanical Relay
N/L2
Rectifier Assembly
Relay may be installed in any one of the three locations shown

Figure 9 Mechanical and Mercury Displacement Relay Installation

- +
L1
Normally Open Solid
State Triac Relay
N/L2
Rectifier Assembly
Relay may be installed in any one of the two locations shown.

Figure 10 AC Solid State Triac Relay Installation

MOBILTEX® DATA LTD.
Calgary, Alberta
~
Rectifier
Normally Closed
Bridge
Mechanical Relay
~
Rectifier Transformer
AC Solid State Triac Relay Installation
- +
~
Normally Open Solid
State Triac Relay
~
Rectifier Transformer
TITLE:
RMU5 Generic Installation and Configuration Guide
DOCUMENT NO.:
RMU5-MAN-001
Note: Some relays are polarity
sensitive on the control coils. In
those cases, ensure that INT- and
INT+ are connected to the
appropriate terminals on the
relays.
-
Normally Closed
Mechanical Relay
+
Note: AC solid state Triac relays are
also available in three-phase models
for use on the primary side of the
rectifier transformer with three-phase
line power.
-
Rectifier
Bridge
+
SHEET:
18 of 69
Protected
Structure
Protected
Structure
REV:
1.10