Accounts Parameters; I/O Points Parameters; Figure 40 Rmu5 Configuration - User Accounts Properties - Cortalk RMU5 Generic Installation And Configuration Manual

5.2.1.8 Accounts Parameters

The "Accounts" parameters page allows the RMU5 security parameters to be updated. Three levels of access are
available, normal, supervisor, and administrator.
The normal user has access only to reading of status--configuration reads/writes, rectifier control, and system control
functions are all disallowed. The supervisor user has access to everything except configuration writes to the RMU5.
The administrator user has access to all functions.
Figure 40 RMU5 Configuration – User Accounts Properties
For each of the three defined users, the following parameters are available:
1. Username. The username for the particular access level. This value is hard coded for each account type.
2. Password. The password for the particular access level. A password with a maximum length of 15 characters may
be entered.

5.2.1.9 I/O Points Parameters

The "I/O Points" parameter page contains settings related to each I/O point in the system. The RMU5 has 13 built in
I/O points, and is expandable to 50 I/O points using external modules attached to the sensor expansion bus.
MOBILTEX® DATA LTD.
Calgary, Alberta
TITLE:
RMU5 Generic Installation and Configuration Guide
DOCUMENT NO.: SHEET:
RMU5-MAN-001
REV:
41 of 69 1.10