Advertisement
Chapter 2: Preparation
2.3 Change Filament
1
Take the filament tubes and push the ends in
the filament guide and print-head. These will be
used to feed the filament to the print-head
4
FELIXprinters Quick Start Guide for the FELIX Tec 4
2
Place the filament spools on the spool holders.
5
Place the filament into the print-head. We will
feed the filament completely through the extrud-
ers on the next page.
3
Take the end of the filament, and create a clean
end, by cutting the filament with a scissor.
i
Clean and replace the dust
filter periodically to improve
the lifetime of the extruders
and nozzles.
Page 14
Advertisement
